Animal Surgical Equipment Accessories
Replacement tee for Instech automated blood sampler. 18ga, 3-way, conductive. For large animal sampling with Instech ABS1 or ABS2 samplers.
The Instech ABS2/T18C3 is a specialized tubing set designed for the ABS2 Automated Blood Sampler™ (ABS2™) specifically for large animal applications. This VAB™ compatible tubing set features an 18-gauge configuration to support higher flow rates. The design integrates a low-loss reservoir that prevents hemodilution by returning the leading edge of each sample to the animal, reducing blood waste. Integrated PinPorts™ maintain a closed, aseptic system for manual sampling or flushing without breaking the fluid line.
Features
- Application: Automated blood sampling for large animal species
- Compatibility: Specifically for ABS2™ systems and large animal VABs™
- Design: Low-loss configuration to minimize blood waste
- Access: Integrated PinPorts™ for aseptic manual access
- Specifications: 18ga (0.031 inch) ID for increased flow capacity
SAI Infusion Technologies 45"" Extension Line - PU, with 23G Catheter Connector
45" PU Extension Line with 23G stainless steel catheter connector. 25/pack. Product is for laboratory animal research only. ** If a COA is required it must be requested when the order is placed or a $50.00 fee will be apply. Contact Thermo Fisher Customer Service at 800-766-7000 to request to COA. **
World Precision Instrument Mouse & Rat Ultra Precise Digital Stereotaxic Instrument With Adaptors
10 Micron Resolution in All Three Directions
Building on WPI Rat Stereotaxic design, our Digital model offers greater speed of operation and increased accuracy. Fit with an easy-to-read digital display and sealed electronic sensors operation of the instrument is easy and precise. Simply move your probe to an established reference point (e.g. Bregma), zero the LED display and move to the desired coordinates.
NEW FEATURE: The ONLY stereotaxic instrument line on the market with an integrated warming base included on all units! Simply purchase the Temperature Control Box 1 (505375), or Temperature Control Box 2 (505376) and probe (505377) to use the warming function.
Instech Luer stub, 18ga (green) x 0.5in (12mm), non-sterile, pack of 1000.
The Instech LS18K is a non-sterile bulk package of luer stubs (blunt needles) used as tubing connectors. These female luer stubs are designed to connect infusion tubing or catheters to syringes or other male luer connectors during experimental procedures.
Features
- Component Type: Female luer stub / Blunt needle connector
- Gauge: 18ga
- Tip Length: 0.5 in (12 mm)
- Tip Design: Deburred to prevent damage to tubing
- Hub Color: Green
- Material: Polypropylene hub with stainless steel tip
- Sterility: Non-sterile
- Quantity: Package of 1000
- Application: Connecting catheters to syringes or external infusion tubing
Med Vet International C-MUZZLE/W/MOUTH/FLAPS/SIZE/5
Size 5 Recommended Breed Bull Mastiffs Rottweilers
Braintree Scientific La Pias Ear Tags, 5 Colors, number 61-80/ea
La Pias Ear Tags - Animal Identification Made Easy Specially suited for use with small lab and research animals (mice, rats and other rodents). The light weight easy-to-read tags allow for trouble-free identification. Ear tags are numbered from 1-100 (available up to 999) Available as Stainless Steel (non-colored) or in 5 Once applied, they cannot be easily removed Laser-etched number provides durability Material Numbered Tag: Aluminum Clasp: Stainless Steel Size Mouse: 3.5mm O.D. with 3mm PinRat: 3.5mm O.D. with 5mm Pin **Sold for research purposes only and not for human use**
Braintree Scientific Partial Body Irradiation Shield, <25g Dual flank, body dia.
Irradiation Shield 1" for mice <25g The shields are not suitable for 360 degree irradiation (typical of a Cs source), and they are limited for use in units that produce energies less than 350kVp (X-Ray). The fixtures are to be used with fixed beam X-ray sources projecting vertically and do not protect the exit side of the irradiated specimen. A shield designed for use with a Cs source typically requires 4 times the lead thickness. These shields are " (6.35mm) lead, and the attenuation factor depends on the kVp energy they are used with. Attempts to use our shields with a Cs source will result in inadequate shielding and overexposure to protected areas of an animal. The shields are regularly used in the Orthovoltage energy range (<320 kVp) and provide about a 100X attenuation. See Attenuation Curves for a better evaluation. **Sold for research purposes only and not for human use**
Med Vet International URN/CAT/SILHOUETTE/SHALE
The Jorvet shale colored silhouette cat urn holds up to 30 cubic inches and is large enough for any cat up to 30lbs It is a beautifull brass urn with brass inlays of a cat silhouette
Med Vet International URN/SLATE/CLASSIC PAW/LARGE
Jorvet s large classic slate urn is handcrafted in brass with a slate finish It has pewter paw print inlays and a lid that is threaded for a tight seal
Med Vet International URNS/RADIANCE/SMALL/EACH
JorVet introduces an expanded range of designer style pet urns to offer veterinarian clients a wider range of choices for cremation urns All urns have a threaded screw on lid for security Radiance Urn Small Dimensions (in inches) 6 8 x 4 8 Capacity (cubic inches) 80 Pet Weight (lbs) 35-70
Instech PE-90 tubing, .034x.050in (0.9x1.3mm), 30m (98ft) spool, non-sterile.
The Instech BTPE‑90 is a PE‑90 low‑density polyethylene tubing with a .034x.050in (0.9x1.3mm) profile, providing a stiff, low‑permeability flow path suitable for external infusion and sampling applications. Supplied non‑sterile on a 30m (98ft) spool, it offers excellent compound compatibility and is commonly used in laboratory research setups requiring larger‑bore PE tubing.
Features
- PE‑90 low‑density polyethylene tubing
- .034x.050in (0.9x1.3mm) dimensions
- 30m (98ft) non‑sterile spool
- High compound compatibility and low air permeability
- Stiff, durable tubing for external use
- Not for intravascular or human use
Tube sets for Instech P720 peristaltic pumps, dual channel, .031in ID silicone with .062in ID barb inlet and outlet (mates with 062 tubing), unbalanced for maintaining levels in chambers. Package of 5, nonsterile.
The Instech P720/TS‑DBS031SDBSU is an unbalanced two‑channel tube set for P720 peristaltic pumps, built with .031in ID silicone tubing and dual .062in barb connectors on each end. Designed for differential or asymmetric flow conditions, these non‑sterile tube sets are supplied in packs of five and support smooth, reliable dual‑path fluid delivery in research applications.
Features
- Unbalanced two‑channel configuration for differential flow
- .031in ID silicone tubing for mid‑range flow rates
- Dual .062in barb inlet and outlet connectors
- Packaged non‑sterile in sets of five
- Compatible with all P720 two‑channel pump configurations
Med Vet International Dasuquin W/Msm For Dogs, Under 60Lb, 84 Chew Tabs
PHV DASUQUIN W/MSM FOR DOGS, UNDER 60LB, 84 CHEW TABSProducts are not always manufacturer specific. Actual product appearance may differ from website image.